Quality sheets and plates made of alloyed, special and stainless steels
| Pressure vessel boiler sheets and plates | |
|---|---|
| 13CrMo4-5 - 1.7335 - A387 grade 11/12 | 10CrMo9-10 - 1.7380 - A387 Grade 22 |
| 12CrMo19-5 - 1.7362 - A387 Grade 5 | X10CrMoVNb9-1 - 1.4903 - A387 grade 91 |
| 14MoV6-3 - 1.7715 | P295GH - 1.0481 |
| P355GH - 1.0473 | |
| Sheets and plates for Quenching and tempering, nitriding | |
|---|---|
| 16MnCr5 - 1.7131 | 20MnCr5 - 1.7147 |
| 30HGSA | 15CDV6 |
| 25CrMo4 - 1.7218 - A829/A505/A506 Gr. 4130 | 42CrMo4 - 1.7225 - A829/A505/A506 Gr. 4140 |
| C15 - 1.0401 - C15E - 1.1141 | C22E - 1.1151 - st20 |
| C60 - 1.0601 - C60E - 1.1221 | C60W - 1.1740 |
| Spring steel sheets and plates | |
|---|---|
| C67S - 1.1231 - AISI 1065 | C75S - 1.1248 - AISI 1075 |
| C100S - 1.1274 - AISI 1095 | 60S2A - 65Si7 - 1.5028 |
| 51CrV4 - 1.8159 - AISI 6150 | 65G - 65Mn4 - 1.1240 |
| Abrasive wear resistant sheets, plates | |
|---|---|
| X120Mn12 - 1.3401 - 11G12 - Z120M12 |
| Tool steel sheets and plates | |
|---|---|
| 1.2067 - 102Cr6 | 1.2235 - 80CrV2 |
| 1.2003 - 75Cr1 | 1.2345 - X50CrMoV5-1 |
| 1.2703 - 72NiCr2 | 1.2379 - X153CrMoV12 |
| 1.2419 - 105WCr6 | 1.2510 - 100MnCrW4 |
| 1.3243 - HS6-5-2-5 | 1.2842 - 90MnCrV8 |
| 1.3343 - HS6-5-2C | 1.3355 - HS18-0-1 |
We divide the sheets into thin and thick sheets. The offer of the Senmaier company includes Sheet Metal:
- Sheets and plates made of thermal improvement steel
- Spring, carbon and alloy plates
- Carburizing plates
- High-manganese wear-resistant steel sheets (Hadfield steel)
- Chromium heat-resistant sheets, chromium-nickel sheets with aluminum, silicon, molybdenum, titanium additives etc.
- Heat and creep resistant steel sheets
- Stainless, acid-resistant, corrosion-resistant quarto sheets
- Alloy sheets for heat-chemical treatment
- Corrugated Corten sheets resistant to atmospheric corrosion
- Manganese spring sheets 65G
- Chromium-molybdenum sheets
- Steel sheets of duplex type. superduplex
- Chromium-manganese-silicon sheets
- Ferrite and martensitic chromium sheets
- Nitriding sheets
- Tool steel sheets for hot and cold working
- Tool sheets for shallow and deep quenching
- Steel sheets of high-speed steel
- Titanium and titanium alloys sheets
- Nickel plates for low temperature operation
- Boiler sheets for operation at higher temperatures and for pressure equipment
- Bearing steel sheets
- Superalloys sheets - nickel, chromium-nickel
- Sheets of pure ARMCO iron
- Hydrogen-resistant sheets at high pressures
- Rolled sheets
Cold-rolled sheets made from stainless steel, duplex, heat-resistant steel, quenching and temperting steel, and spring steel
- Cold rolled carbon structural alloyed steel sheets 0.5 to 4.0mm thick.
- Formats: width 600 - 1500mm, length 2000 - 6000mm
- Cold-rolled corrosion-resistant, acid-resistant, heat-resistant and stainless steel sheets 0.3 to 15mm thick.
- Formats: width 360 - 2150mm, length 2000 - 8000mm
| Surface of cold-rolled, corrosion-resistant, heat-resistant, galvanized sheets | |||
|---|---|---|---|
| 2D | Pickled | Smooth | With heat treatment |
| 2B | Straight and pickled | Smoother than 2D | |
| BA / 2R | Straight and pickled | Mirror + Foil | |
| 2E | Surface without scale | Rough matte | |
| 2C | Surface with scale | Smooth | |
Hot-rolled, stainless, boiler, carburizing, wear-resistant, bearing, carbon, tool, high speed plates
- Hot-rolled sheets of carbon steel structural alloy 2 to 600mm thick.
- Formats: width 1000 - 3000mm, length 2000 - 12000mm
- Hot-rolled, corrosion-resistant, acid-resistant, heat-resistant and stainless steel sheets 2 to 200mm thick.
- Formats: width 500 - 2500mm, length 2000 - 12000mm
| Surface of hot-rolled, corrosion-resistant and heat-resistant sheets | |||
|---|---|---|---|
| 1C | Surface with scale | rough | With heat treatment |
| 1D | Pickled surface | ||
| 1E | Surface without scale | No heat treatment | |
| 1U | Surface with scale | ||
Special surfaces of stainless and acid-resistant sheets available on request.
| Special surfaces of corrosion resistant plates | |
|---|---|
| 3N | Sheet sanded with abrasive grain 80-120 |
| 4N / 4TK | Sheet sanded with abrasive grain 150-400 |
| 1K / 2K | Sheets polished to a gentle gleam |
| 1P / 2P | Sheets polished for a mirror effect |
| 1M / 2M | Decorative sheets |
| SB | Brushed sheets |
Cutted elements from sheets/plates by saw, plasma, laser and waterjet
| Cut or burned elements of sheet metal | |
|---|---|
| Gas-plasma cut parts | thickness up to 300mm |
| Laser cut parts | thickness up to 30mm< |
| Saw cut elements | thickness up to 1000mm |
| Water cut elements | thickness up to 150mm |
- rings or discs with a hole burnt from sheets,
- discs, full wheels burnt from sheets,
- Forms, cubes, calcines burnt or cut from sheet metal,
- burnt elements according to technical drawings,
- flat bars cut from steel plates and forged blocks,